Hioki-PW3360-20 Clamp On Power Logger

Code: PW3360-20

Clamp On Power Logger improvement of energy consumption in buildings or factories. Measuring range 600 V AC, Input Voltage 3 channels / Current 3 channels

Description

Hioki-PW3360-20 Clamp On Power Logger

The Hioki PW3360-20 Clamp On Power Meter is a multi-channel power measuring device utilizing clamp sensor input to accurately and safely measure power on single-phase to three-phase lines. The PW336020 compact 3-Phase 4-Wire energy logger monitors power demand and other power parameters to aid in energy audits and validate energy saving measures.

Voltage 3 channels / Current 3 channels
Single-phase 2-wire (1P2W, 1P2W 5 2 circuits, 1P2W 5 3 circuits)
Single-phase 3-wire (1P3W, 1P3W+I, 1P3W1U, 1P3W1U+I)Three-phase 3-wire (3P3W2M, 3P3W2M+I, 3P3W3M)
Three-phase 4-wire (3P4W), Current only: 1 to 3 channel

Voltage range

Measuring range 600 V AC
Total display area: 5V to 1000 V (less than 5 V displays as 0 V)
Effective measurement range: 90 V to 780 V, peak: ±1400V
Accuracy ±0.3% rdg. ±0.1% f.s.

Current range

– Load current
CLAMP ON SENSOR 9694 : 500m/1/5/10/50 A
CLAMP ON SENSOR 9695-02 : 500m/1/5/10/50 A
CLAMP ON SENSOR 9660 : 5/10/50/100 A
CLAMP ON SENSOR 9695-03 : 5/10/50/100 A
CLAMP ON SENSOR 9661 : 5/10/50/100/500 A
CLAMP ON SENSOR 9669 : 100/200/1k A
FLEXIBLE CLAMP ON SENSOR CT9667 : [50/100]*2 /500/[1kA]*2 /5k A
– Leakage current
LEAK CLAMP ON SENSOR 9657-10 : 50m/100m/500m/1/5 A
LEAK CLAMP ON SENSOR 9675 : 50m/100m/500m/1/5 A
Total display range: Within 0.4 to 130% of the range
Effective measurement range: Within 5 to 110% of the range peak: ±400% of range, however, maximum range is 200%.
Accuracy ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy

Power range

Measuring range 300.00 W to 9.0000 MW
Depends on voltage/current combination and measured line type (see Measurement Range Configuration Tables)
Total display range: Within 0 to 130% of the range (“0W” display indicates zero rms voltage and/or current)
Effective measurement area: Within 5 to 110% of the range
Accuracy ±0.3% rdg. ±0.1% f.s. +clamp sensor accuracy
Screen : 3.5″ TFT color LCD (320 × 240 pixel)
SD Card
Sampling interval Recording Frequency 1/2/5/10/15/30 s, 1/2/5/10/15/20/30/60 min
Use a LAN cable to connect the Unit to PC for real-time remote monitoring
USB Interface
Power supply AC Adapter
Size 180 x 100 x 48mm (550g)

Standard equipment

ตัวเครื่อง
Voltage Cord L9438-53 x 1 set
AC Adapter Z1006 x 1
USB cable x 1
Instruction manual x 1
Measurement guide x 1
Color spiral tubes x 1 set (Red, yellow, blue x 2 each)
For color-coding clamp sensors
Spiral tubes for grouping clamp sensor cords x 5

Accessory

PW9002 Battery Pack Set	Z4001 SD Memory Card 2GB	Clamp on Sensors (Current Input)	Clamp on Leak (Leak Current Input)

Clamp on Sensor

9660 Clamp on Sensor (100A AC)	9661 Clamp on Sensor (500A AC)	9669 Clamp on Sensor (1000A AC)	9694 Clamp on Sensor (5A AC)

9695-02 Clamp on Sensor (50A)	9695-03 Clamp on Sensor (100A)	CT9667 AC Flexible Current Sensor (5000A/ 500 A AC)	9219 Connection cable for 9695-02/ 9695-03

Clamp on Leak

9657-10 Clamp on Leak (10A AC)	9675 Clamp on Leak (10A AC)

Video Hioki-PW3360-20

General Specifications

Display device	3.5 inch TFT color LCD (320 x 240 pixel)
	Japanese, English (supported from version 1.50), Chinese (Simplifi ed, supported from version 2.00) Backlight auto-off function (after 2 minutes)
Operating environment	Indoors, Pollution degree 2, altitude up to 2000 m (6562-ft.)
Operating temperature and humidity (no condensation)	-10°C to 50°C (14°F to 122°F), 80% RH or less During LAN communication: 0°C to 50°C (32°F to 122°F), 80% RH or less During battery operation: 0°C to 40°C (32°F to 104°F), 80% RH or less During battery charging: 10°C to 40°C (50°F to 104°F), 80% RH or less
Storage temperature and humidity (no condensation)	-20°C to 60°C (-4°F to 140°F), 80% RH or less However, the battery's storage temperature range is -20°C to 30°C (-4°F to 86°F), 80% RH or less
Dielectric strength	4.29 kVrms AC (1 mA sense current) between voltage input terminals and external terminals, 50/ 60 Hz for 60 sec.
Applicable standards	Safety: EN61010, EMC: EN61326, EN61000-3-2, EN61000-3-3
Power supply	•Z1006 AC Adapter (12 V, 1.25 A), Rated supply voltage 100 VAC to 240 VAC, Rated power supply frequency 50/60 Hz •Model 9459 Battery Pack (Ni-MH DC7.2 V 2700 mAh)
Charge function	Charges the battery regardless of whether the instrument is on or off. Charge time: Max. 6 hr. 10 min. (reference value at 23°C)
Maximum rated power	•When the Z1006 AC Adapter is used: 40 VA (including AC adapter), 13 VA (PW3360-20 instrument only) •When the 9459 Battery Pack is used: 3 VA
Continuous battery operation time	Approx. 8 hr. (Continuous, backlight off) (when using the battery pack)
Backup battery life	Clock and settings (Lithium battery), Approx. 10 years @23°C (@73.4°F)
Dimensions	Approx. 180W(7.09") x 100H(3.94") x 48D (1.89") mm (without PW9002) Approx. 180W(7.09") x 100H(3.94") x 68D (2.68") mm (with PW9002)
Mass	Approx. 550g (19.4 oz) (without PW9002), Approx. 830g (29.3 oz) (with PW9002)
Accessories	Voltage Cord L9438-53(1 set), AC Adapter Z1006 (1), USB cable(1), instruction manual (1), measurement guide (1), color spiral tubes (1 set): red, yellow, blue/two each, for color-coding clamp sensors, spiral tubes for grouping clamp sensor cords (5)

Measurement Specifications

Connection	Single-phase 2-wire (1P2W, 1P2W 5 2 circuits, 1P2W 5 3 circuits Single-phase 3-wire (1P3W, 1P3W+I, 1P3W1U, 1P3W1U+I) Three-phase 3-wire (3P3W2M, 3P3W2M+I, 3P3W3M) Three-phase 4-wire (3P4W), Current only: 1 to 3 channels
Simultaneous power/current measurement modes	1P3W+I: 1 power circuit and 1 current channel 3P3W2M+I: 1 power circuit and 1 current channel
Measurement items	Voltage RMS, current RMS, voltage fundamental wave value, current fundamental wave value, voltage fundamental wave phase angle, current fundamental wave phase angle, frequency (U1), voltage waveform peak (absolute value), current waveform peak (absolute value), active power, reactive power (with lag/lead display), apparent power, power factor (with lag/lead display) or displacement power factor (with lag/lead display), active energy (consumption, regeneration), reactive energy (consumption regeneration), electricity rate display (by means of planned future function update), active power demand quantity (consumption regeneration), reactive power demand quantity (lag, lead), active power demand value (consumption, regeneration), reactive power demand value (lag, lead), power factor demand, pulse input
Calculation selection	Power factor, reactive and apparent power: rms calculation/ fundamental wave calculation
Measurement accuracy (50/ 60Hz, power factor = 1)	Voltage: ±0.3% rdg. ±0.1% f.s. Current: ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy Active power: ±0.3% rdg. ±0.1% f.s. +clamp sensor accuracy Clamp-On Sensor 9661 accuracy: ±0.3% rdg. ±0.01% f.s. (Accuracy depends on clamp sensor. See page 6 for the accuracy of each model, and page 7 for combined accuracy of Model PW3360-20 and each clamp sensor.)
Display update rate	Approx. 0.5 sec (except when accessing SD card or internal memory, or during LAN/USB communication)
Measurement method	Digital sampling and zero cross synchronization calculation method Sampling: 10.24 kHz (2048 points) Calculation processing 50 Hz: Continuous, gapless measurement at 10 cycles 60 Hz: Continuous, gapless measurement at 12 cycles
A/D converter resolution	16bit