Micronics - Ultraflo U1000MKII-FM Fixed Clamp-on Flow Meter

Micronics – Ultraflo U1000MKII-FM Fixed Clamp-on Flow Meter

Code: U1000MKII-FM

Fixed Clamp-on Flow Meter Ultraflo U1000MKII-FM pipe range 2 options, for 22mm – 115mm and 125mm – 180mm. Flow Velocity Range 0.1m/s – 10m/s (Price not include 7% VAT)

Description

Ultraflo U1000MKII-FM Fixed Clamp-on Flow Meter

The New U1000MKII-FM is a Fixed, clamp-on, pipe mounted, ultrasonic flow meter, which delivers significant installation savings and non-invasive, dry servicing benefits for pipe sizes ranging from 22mm – 180mm (6″) OD.

Key Features & Benefits:

New: larger pipe range 2 options, fully adjustable for 22mm – 115mm and 125mm – 180mm (6″) OD
New: Optional Modbus RTU slave, RS485 serial
New: cross correlation flow measurement system
New: 1Mhz transducers to get through poor/old thick wall pipes and larger pipework
New: Water/Glycol option
Simple to install: connect power and enter the pipe inside diameter, adjust the sensors and clamp-on the pipe, no specialist skills or tools required
A clamp-on non-invasive alternative to traditional in-line meter installation, plus dry servicing, providing minimum downtime and maximum availability.
LCD with backlight – install & service information.
Integrated pulse and optional 4-20mA output – aM&T & BEM’s compatible with Modbus.

Video : Fixed Clamp-on Flow Meter

SPECIFICATION

Technical Information
Measurement Technique	Measurement Technique: Ultrasonic transit time method for flow measurement
Turn Down Ratio	200:01
Accuracy	+/- 1% – 3% of flow reading for >0.3m/s (1 ft/s)
Flow Velocity Range:	0.1m/s – 10m/s (0.3 ft/s – 32 ft/s)
Pipe Range:	Available in 2 options. 22mm to 115mm and 125mm to 180mm OD. Note Pipe size is dependent on pipe material and internal diameter.
Water Temp Range:	0°C – 85°C (32°F – 185°F)
Pulse Output:	Pulse or Frequency. Pulse for Volume flow and Alarms. Frequency for flow rate. The pulse output can be configured as a loss of signal or low flow alarm.
4-20mA Output:	Optional 4-20mA flow proportional output
Modbus Communication:	Optional Modbus RTU slave, RS485 serial link hardware layer. Modbus connection cable is 1m.
External Power Supply:	12V – 24V +/- 10% AC/DC at 7 watts per unit. Optional plug in 12V power supply.
Electronics Enclosure:	IP54
Input/Output Cable:	5m x 6 core for power in, 4-20mA and pulse out
Dimensions:	250mm x 48mm x 90mm (10" x 2" x 4") (electronics + guide rail)